Collinson Line-Interactive UPS PRO121200

$364.28 (GST inclusive)

»Collinson Line-Interactive UPS PRO121200
»Nominal Voltage: 220Vac to 240Vac
»Waveform (Battery Mode): Simulated Sinewave
»Typical Transfer Time: 4ms
»Alarm: Battery Mode, Low Battery, Overload, Fault
»Capacity: 1200VA/720W
»Dimension (W x D x H): 148mm * 298mm * 178mm
»Net Weight: 8.7kg
»Warranty: 2 years limited warranty from manufacturing defects

Description

Line-Interactive UPS

For Wireless networks, Internet access point, Point of sales (POS) equipment, PCs, Workstations, Business telephony equipment, Gaming consoles.

The PRO 12 series UPS provides cost-efficient surge protection and guaranteed power for electronics in your business or home. Designed with standard outlets, it allows ease of power connection to your equipment. Its Cold Start feature also enables it to start without mains.

No matter where you are located, there will be possible power problems. With its Automatic Voltage Regulation (AVR) with Boost, the PRO 12 UPS provides protection from unsafe voltage fluctuations as well as damaging surges and spikes. The AVR with Boost also helps to correct low voltages without discharging the battery, thus preserving battery life. In addition, with a wide input voltage range, useful battery life is maximized.

In today's challenging retail environment, protecting your POS equipment against damaging power problems is crucial. Regardless of whether you are operating a large chain-store or an
independent business, by safeguarding against power disturbances and blackouts/outages, you can save thousands of dollars in lost transactions and prevent loss of valuable customers.

Technical Specification of PRO 12 series*
Model PRO12600 PRO12800 PRO121000 PRO121200 PRO121500 PRO122200
Capacity 600VA/360W 800VA/480W 1000VA/600W 1200VA/720W 1500VA/900W 2200VA/1320W
Input
Nominal Voltage 220Vac to 240Vac
Voltage Range 162 - 290 Vac (Single Boost) Optional: 140 to 300Vac (Double Boost)
Frequency 50/60Hz (auto sensing)
Power factor >=0.99
Output
Nominal Voltage (Battery Mode) 220Vac to 240Vac
Frequency (Battery Mode) 50Hz/60Hz 1 1%
Waveform (Battery Mode) Simulated Sinewave
Typical Transfer Time 4ms
Overload Protection Circuit breaker or internal firmware protection
Batteries
DC Voltage 12V 24V
Typical Recharge Time to 90% 8 hours
Indicators
Display LED or LCD(Optional)
Alarm Battery Mode, Low Battery, Overload, Fault
Communication
Interface Optional: RS232 / USB / HID USB / RJ45 / RJ11
Management
Management Auto Recharge, Auto Restart
Software (Optional) Power Management Software
Environment
Temperature Range 0’C-40’C
Humidity 0% - 90% (non-condensing)
Physical
Dimension (W x D x H) 96 mm x 286 mm x 138 mm 148 mm x 298 mm x 178 mm
Net Weight 4.3 kg 4.5 kg 6.5 kg 8.7 kg 9.1 kg 10.8 kg

* Specifications subject to change(s) without prior notification.

Warranty: 2 years limited warranty from manufacturing defects